> You'll need to adjust how
> far in the switch resides so your lights won't stay on all the time.
> The travel is very short on the switch so placement is important.
> You'll probably need to loosen bolts that hold the pedal box to the
> footwell if they are still making the oblong shape. Otherwise it
> won't clear the sheetmetal as you thread it in.
Yeah, what he said. But also, be aware that this agjustment is more critical
than it would appear. If the switch is screwed in too far, it will prevent
the pedal from coming far enough back and will cause weird problems with the
brakes not releasing properly. See page 164 of the Haynes manual.
David Lieb
|