Chris,
The bonnet release cable is held in place by a bend over tab right next to
where the steering column penetrates. The cable routes under the steering
column, up next to the frame. About 1/2 way down the frame (just about at
the apex of the hump) there is a metal clip that is screwed to the frame to
hold the cable.
Hope this helps.
Brent
----- Original Message -----
From "Chris King" <cbking at alum.rpi.edu>
To: <spridgets@autox.team.net>
Sent: Tuesday, March 09, 2004 11:52 AM
Subject: Bonnet cable routing
> Listers,
>
> Any of you with 1500s, is there any sort of clip that holds the bonnet
> cable in place when it's routed from the trans tunnel to the release
> mechanism? It's been so long since I disassembled my car I've forgitten
> the details.
>
> Thanks!
>
> -=Chris
|