Re: oil pressure

Will a picture help?
 
http://home.comcast.net/~kvcbk/oilsender1.JPG
 
There's a brass Tee screwed into the block under the dizzy boss in the
picture. You should see a nice machined surface right under the dizzy. 
 
-=Chris


Chris King 
http://home.comcast.net/~kvcbk/ 

 <-----Original Message----->

                 From: Dbcooper292@aol.com
Sent: 10/26/2003 9:54:51 AM
To: spridgets@autox.team.net
Subject: Re: oil pressure  

I'm embarassed to ask this, but where does the oil pressure guage hook
up? 
during the rebuild the machine shop dutifully filled, sealed or screwed
bolts 
into all the open holes on my motor to keep it spiffy and I can't 
remember/find it. I believe it came out (1500 midget) forward of the
starter and below 
the distributor, but even if that's the case there are at least three
potential 
spots in that area. Any specifics? 

Thanks, 

Mark M.