Mike,
Paul's suggestion will probably work. That's how I got the rivets
that hold the number plate off the block. If that fails, you could JB
Weld the Torx driver to the head after masking off what you want to
protect. Afterwards, You can get the screw off the Torx.
Gerard
At 8:39 PM -0700 8/18/03, Mike MacLean wrote:
>There must be someone on the list that has stripped a Torx screw before
>and knows how to remove it. I was changing the primary drive oil for my
>5000 mile service in my Harley today and one of the five small Torx
>screws that hold the cover on the primary drive cover stripped. I
>cannot refill the drive with oil until I get the cover off. Anyone know
>what to use to get the screw out? The only problem is that the screw is
>surrounded by chrome of the cover. Got to be careful.
>Mike MacLean-60 Sprite
--
One meets his destiny often in the road he takes to avoid it.
~French Proverb
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|