I ran into the same problem with 175/70 tire on wire wheel spare. I am
using an MGB spare hold down from a Rostyle wheel B. It threads in the
same, and is longer than the spridget hold down, but not as long as the B
wire wheel hold down.
David Riker
63 Falcon
70 Torino
74 Midget
http://home.pacbell.net/davriker/
----- Original Message -----
From <Daniel1312 at aol.com>
To: <spridgets@autox.team.net>
Sent: Monday, July 07, 2003 3:17 PM
Subject: Spare wheel clamp to boot floor
> Hi list,
>
> I recently bought a secondhand 'spare wheel clamp to boot floor' for my
wire
> wheel 69 and found it wasn't long enough. I figure this is because of the
> non-standard tyre fitted to the rim (175/70). Does anyone know if the
wire
> wheel clamp for the MGB is:
>
> A: longer and if so by how much?
>
> B: the same thread.
>
> Thanks
>
> Daniel1312
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|