Chuck,
Little Bits has the originals, mounted straight up, centered, from the
hole in the metal box and the top edge of the bumper is flush to the top
edge of the bulkhead. The bumpers are 13/16 diameter at the bottom with
about a 1/16 taper on the side. Drill at 13/32 down I guess. Height is
9/16. They look like feet they bought from an electronics or radio type
application.
Dave & Bobbie
Charles Christ wrote:
>i am missing the two little rubber bumpers that screw into the interior
>just above the two tin boxes that you stow the top bows in. also the strap
>that held the bows fast up under the rear cockpit trim. who has these
>available and are the parts available "proper" or are they "kinda close" in
>their resembleance to original? i'd like to get these bits in the near
>future. honestly i have seen these on restored cars but my car did not come
>with these bits way way back when i first got it. also! when i get the
>two rubber bumpers, can someone with them in the proper location please
>measure the height from top of tin box to center of bumper. i need that
>measurement in order to properly replace them once i locate a
>pair....please?
>
>chuck.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|