Larry Pitts wrote:
>
> A silly question if I could. I'm going to install new
> A-arms and new suspension on my bugeye project.
Larry
The pins go in one way. Opposite each other. The welded ends are on the
inside, the nutted ends are outboard.
You stick a bushing on the inner end of the A arm, slide the pin in, put
the other bushing on thru the larger outboard hole then the washer and
nut.
One nut faces forward, one nut faces backwards.
--
Frank Clarici
Toms River, NJ
2 Sprites, 2 Midgets
http://www.exit109.com/~spritenut
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|