Bill Bryant wrote:
>Well, I am finally almost finished sorting out the wiring on my recently
>aquired '73 Midget. I had a couple of questions...
>
>My heater fan switch seems to have 3 positions(on-lo-hi) and my heater fan
>only 2(on-off)?
>
>I have done the basic detox according to lindsay...but I was wondering about
>the carb breather y-tube tha runs from between the 2 SUs to a canister on
>the front of the engine...Just leave it or what?
>
>What about crankcase ventilation?
>
>
>
Bill,
The heater has one speed. Sometimes the old Lucas switchs "feel" like
they have a middle "stop" but that is just the stiff mechanics of an old
switch. (unless someone has replaced the switch with a three position
switch from another application). I've seen headlight switches (3
position) used for the heater just because they fit in the hole in the dash.
As for the y-tube.... Leave it there. It should provide the crankcase
ventilation your engine needs.
Kevin V.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|