Will,
There are a couple possible answers depending on what you're trying to get out.
The electrical portion is held with a small set screw from underneath. The
key tumbler is held in with two screws that the heads shaer off of onece
they are installed. To remove them, you will either need to create a screw
slot with a dremel or drill a centered pilot hole the right size for an
easy out. I've done it the latter way before. You'll need to drop the
column bolts under the dash and remove the cowling to get at any of it.
Gerard
At 1:16 PM -0800 11/9/02, William West wrote:
>Ok, after an embarrasing hour I give up. How do I pull ignition switch out
>of the housing on my 71 midg?
>
>Point and laugh all you want, I can take it...
>
>Will
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|