now Jay, be nice.
Dan Walters
'63 sprite
'74 midget
Brick, NJ
----- Original Message -----
From <type79 at ix.netcom.com>
Cc: <spridgets-digest@autox.team.net>; <spridgets@autox.team.net>
Sent: Thursday, November 07, 2002 1:57 PM
Subject: Re: Brake bore
> The filler neck on top.
>
> Insert a narrow metal ruler into to the filler and measure to the top of
the
> filler neck.
>
> PS Remember to remove the cap first.
>
> jay f
>
>
> JRLNJ@aol.com wrote:
>
> > <PRE>Where do measure the brake bore on the master cylinder? The two
front
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|