Brent,
Have you considered a simpler problem. Did you replace
the flex hose going to the rear brakes. Thought I had
the same problem. Turned out to be a collapsed brake
hose. Replaced hose, rear brakes were then simple to
bleed.
Jim Gruber
Dayton, Oh
Bugsy '68 Sprite, future Bugeye in disguise
Date: Mon, 6 May 2002 09:11:08 -0700
From Gerard <pixelsmith at gerardsgarage.com>
Subject: Re: Master Cylinder Bleed
Brent,
Did you remember to relink the rear piston to the
front one? This
usually
occurs if the link is not present or broken. When I
rebuilt the one in
my
Bugeye (converted to a dual system) I found no link
present from the
last
"rebuider"!
Gerard
At 8:49 AM -0500 5/6/02, Peter C. wrote:
>Brent,
> Did you re-center the PWDA shuttle?
>Peter C
>======
>At 08:56 PM 5/5/2002, Brent Wolf wrote:
>>Listers
>>
>>Rebuild the brake master cylinder on my 76 today. I
cannot get the
rear
>>brakes to bleed at all. Is there a trick to
bleeding the master
cylinder?
>>What am I doing wrong? It is acting like the rear
portion of the dual
master
>>is not filling at all.
>>
>>Any suggestions???
>>
>>Brent
Yahoo! Health - your guide to health and wellness
http://health.yahoo.com
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|