Re: Sprite Test 2002 08:59:36 -0500

Roger-

As advised by another lister, do
adjust the roller rockers from "side to side" rather than "fore and
aft", as the
roller will roll "with" the feeler gauge other-wise and you will
probably end
up with "too tight" a clearance. BTDT.




Cap'n. Bob
    '61 :{)

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets