Hmmm, maybe we have one locally too. Anxiously awaiting Peter's wisdom as
well!! This could be interesting!
Coastie Bob
'74 Midget
-----Original Message-----
From John.Deikis at med.va.gov [mailto:John.Deikis@med.va.gov]
Sent: Tuesday, February 05, 2002 4:08 PM
To: spridgets@autox.team.net; spridgets-mod@autox.team.net
Subject: Recurving a distributor
>>> I suggest you get someone to provide you with the advance specs
you need and try to re-curve your distributor to get all you can out of
your conversion. It sounds like you're on the right track, might as well
finish it. Good luck.
Peter C
**********************************
Peter:
There's a distributor machine at the auto shop at the local community
college. I may be able to get access to it. How hard is it to check the
curve and do you "dial in" a specific characteristic by changing weights
and/or springs?
--JohnD
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|