Not even close to an expert, but I have welded over the "weldible primer"
supplied by PPG - ONCE. The weld was so poor I had to remove it, clean the
area of all weldible primer and reweld. Never again.
Brent
> ----- Original Message -----
> From: "Gerard" <pixelsmith@gerardsgarage.com>
> To: <Dbcooper292@aol.com>; <spridgets@autox.team.net>
> Sent: Wednesday, December 19, 2001 3:15 PM
> Subject: Re: painting advice wanted
>
>
> > Mark,
> >
> > This info (being more specif) is correct. I have sometimes heard people
> > refer to metal prep as a primer and that is what I thought was your
> > reference. Also, I think the question turned more on how to inhibit rust
> > _without_ dragging out the paint equipment each time an area was
finished
> >
> > I don't know about your welding claim though. I have NO expertise in
> > welding, but everyone I know that does weld will not weld over painted
> > areas because it usually prevents a clean weld. Anyone?
> >
> > Gerard
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// Archives at http://www.team.net/cgi-bin/wilma/spridgets
|