The cosmics are 4 x 100mm bolt pattern and have 3/8 of
inch of positive offset. I am using 1/2 inch of
spacers to clear the brake hoses (I am using MGB
calipers with spitfire rotors which are larger). Care
needs to be taken to not place wheel weights near the
tie rod ends. For the bolt pattern 4 x 100mm is only
1/16 inch under the 4 inch pattern. Divide that in
half and the misalignment is only 1/32 inch. I have
only used these a few days now and very evenly tighten
the lugs and have had no problem.
John
--- Daniel1312@aol.com wrote:
> I thought so. Were they a lot of trouble to fit, eg
> was the bolt pattern ok,
> inset and offset ok without fouling etc? I really
> like them and the
> certainly make a change from the Minilite replicas
> EVERYONE over here fits.
>
> Daniel1312
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
|