per Hugh.. er.. Allen...
>>I bought J-bolts from an Exide battery display at K-mart. I made a cross
>>piece out of angle iron, cut to length and drilled tow holes, then painted
I did the same thing except that for the cross-piece I used a piece of
plastic plumbing pipke with one side cut out so it would fit over the top
edge of the battery and stay in place.
I remember the plastic was easy to cut (and I left the ends fully round
for strength; only cutting the groove as long as the battery) but don't
remember what I cut it with.
Ed in NC
Inspiration is a cat. It never comes when you call it, but
just try to get something else done when it wants your attention.
|