ANTI - SEIZE - (was Re: Exhaust to Manifold Bolts?

--- "Peter C." <nosimport@mailbag.com> wrote:

 coarse thread on one end. Then use anti-seize on the
> end into the manifold, 

For anti-seize use Phillips Milk of Magnesia. 
SERIOUSLY.  There's a MIL-SPEC for it - it's the best
high temp anti seize you can use.  It is used on
aircraft hot air manifolds all the time (nuclear
stuff, too).  
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/