Chuck,
Aren't they studs? 5/16-24 on both ends. Try your local parts
store. That they are the same both ends make them a little harder to find.
Look in the Dorman cabinet under Chrysler manifold stud. Other cars use a
coarse thread on one end. Then use anti-seize on the end into the manifold,
and a brass nut and lock washer and no anti-seize on the pipe end.
Hope this helps.
Peter C
====
At 08:53 AM 8/3/2001, chuck wrote:
>What are y'all using for the 3 bolts that attach the front of
>the exhaust pipe to the manifold? Mine are in need of
>replacement. Seems like stainless will be too brittle,
>especially with the heat, and steel will rust and weaken.
>
>I know I have one broken bolt (will have to remove the
>manifold and easy(sic!)-out the remainder. Don't want
>to have to do this again. What are the options?
>
>thanks,
>
>chuckC (ShiftKey intactus)
|