I tried this tonight on a piece of an old muffler clamp as a test. It
worked pretty darn good.
The reason that I tried it, is to clean up the inside of the pedal box
before I put it back on. I had cleaned up the outside surfaces on a bench
grinder with a brass wire wheel on it. The inside looked like a bit more of
a challenge.
Robert D.
-----Original Message-----
From Lancer7676 at aol.com <Lancer7676@aol.com>
To: spridgets@autox.team.net <spridgets@autox.team.net>
Date: October 16, 1999 8:48 PM
Subject: Re: rust removal off small parts
>Leo: Go to this site! I think this is what you were referring to.
>
>http://members.xoom.com/nlindsey/restoration/Restoration.htm
>Rusty Tool Restoration
>
>---David C.
|