Happy Easter
My car had considerable road rash under the grill and around the signal
lights so I had the paint matched and put into spray cans. I have removed
the bumper and sanded most of the rough spots out, in some places right
down to the metal. I just finshed with the 400 grit sanding.
I'm not sure of the best way to proceed from here. I have 600 sandpaper
and a spray can of primer. Do I prime and then sand it with the 600 or
sand first? What is the best way to clean off all the sanding dust prior
to painting?
Thanks
Dave
'72 Midget MKIII
///
/// (If they are dupes, this trailer may also catch them.)
|