I've seen 4000. Saw a friend wet sand a Bentley with
4000 (basically a cotton ball). It was the best paint
job I had ever seen before he did the 4000. After it
was indescribably beautiful (and he's about 2 miles
from your house, Larry Cogan).
--- WFO Herb <froggi@cdsnet.net> wrote:
> Toby... Is there REALLY 2500 paper!!!???!!! Boy,
> it's been longer than I
> thought, or I'm getting older faster one.
>
> What's next, some new kind of paint gun that wastes
> less paint or can operate
> at a lower pressure or something like that...
>
> Herb
>
> Toby Atwater wrote:
>
> > I have seen 2000, and 2500 at the paint shop...
> talk about smooth! I could
> > not shave for a day and wet sand my car!
> >
> > Toby
> >
> > ...remember when 600 was the "finest" w/d paper
> you could find? Now a 1500
> > grit? Amazing.
> >
> > Frank Clarici wrote:
> >
> > > Mike Maclean wrote:
> > > >
> > > > Anyone know where to get copper stranded
> spark plug wire? All I
> > > > can find around here is steel stranded 7mm
> wire. I think 8mm fits
> > > > better in the Lucas side distributor cap.
> > > > Also, what's the best way to touch up a
> paint chip about the size
> > > > of the tip of yoour little finger. One my
> kids dropped a hammer on the
> > > > edge of the drivers sill and took out a chunk
> of paint. I have some of
> > > > the same paint the car was recently painted
> with and some matching
> > > > hardener. Can I just blob it on and sand it
> down?
> > > > Mike MacLean-60 Sprite
> > >
> > > Mike
> > >
> > > Peter C has some original Bumble bee ignition
> wire. I believe it is
> > > copper core.
> > > Also 8mm wires do not fit side entry caps unless
> you shave the wires
> > > down to 7mm. Or lots of force. (BTDT)
> > >
> > > Paint chip... Mix up a small amount of paint and
> hardener.
> > > dab it on the chip with a small brush or Q tip.
> give it 3 or 4 coats and
> > > build it up higher then the existing paint.
> > > Wet sand the spot WITH A SANDING BLOCK, resist
> the urge to use sandpaper
> > > and your hand, use a block. I would say start
> with 600 grit then hit it
> > > with 1200 or 1500 then buff with a bit of
> compound.
> > > I do it all the time and only you will know it
> was touched up.
> > > --
> > >
> > > Frank Clarici
> > > Toms River, NJ
> > > Just Enough Sprites Again
> > > http://www.exit109.com/~spritenut
=====
Ron Soave
"Driver Carries No Cash"
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
|