Mike a word of caution on the metal core wires, they may interfere with any
piece of electronic equipment within a 5-10 foot radius of the car. I tried
tuning up a 100M with this type of wire and neither my voltmeter or timing
light would work near it, until we put regular suppression core wires on, it
also generated a lot of static with the CB radios in nearby cars, and if you
have electronic ignition on the car it is definitely not reccomended.
macleans@earthlink.net writes:
> Good suggestions on
> copper core wires too.
Peter Samaroo
Charlotte NC
59 Bugeye
59 100-6
71 Midget
|