On Mon, 19 Feb 2001 19:55:38 -0000, rob thomas wrote:
> ----- Original Message -----
> From: Bob Spruck <bspruck@PROFSERV.AMSOFTWARE.com>
> To: Robert Sexson <rsexson@excite.com>; <spridgets@autox.team.net>
> Cc: <rsexson@custom.net>
> Sent: 19 February 2001 17:21
> Subject: RE: Rear hub bearing nut
>
>
> > Yes, the hub nuts are "handed", just like wire wheel knock-offs. About
the
> > only way to get them on/off is with a 1 7/8 " socket. It is almost
> > impossible with an open end wrench, slip-joint pliers, etc.
>
> Normal nut is marked MOWOG, whilst the opposite-direction-from-normal is
> marked UNSHF
The hub nuts on mine, i found after cleaning off, are marked RH and LH
I had an old wrench we called a monkey wrench. After grinding about 1/8" off
one spot it fit perfect.
R.Sexson
74.5 B
74 Midget
_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/
|