Thanks for the reply John,
I'm piecing this upgrade together, but I did get the Spitfire hub
adapters from Mini-Mania.
At any rate, after sizing up the situation a little more I'm going to
try an eighth inch spacer for the arms to start, I'll go as thick as a
quarter inch but anything over that I'm afraid will shorten the bolt by
too much, and if that doesn't work then I'll cut the rotors... I really
don't want to try bending the arms.
Thanks again,
-Drew in San Jose.
John Holliday wrote:
> Drew,
> My big brake kit from Winner's circle only needed very
> little cut off the outer corner of the rotor. So
> slight that it no way affected the pad contact area.
>
> John Holliday
> 67 fprod street sprite
|