LColli3554@aol.com wrote:
>
> Well its saturday mourning thought I'd try to work on my no spark condition a
> bit today. I've tried a jumper wire to the coil from the solinoide but
> nothing. And i've tried a test light off the coil when cranking- no light
> flickering. So now I'm going to look at the ignition switch wiring I need a
> little direction as to what I should look for? I stuck my head in there and
> somebodys been playing with the wires already a couple of splices. I know the
> switch gets power as I can turn the key and the motor will spin over.
> Thanks in advance Todd.
Check the white wire from the key, around the tach, and to the coil.
A hot wire from the battery to the coil will over ride the ignition.
--
Frank Clarici
Toms River, NJ
The bug in the rice bowl
http://www.exit109.com/~spritenut
|