Tell Tim he should come up with a rear disk brake setup to match
the 10"/ 4-pot caliper setup he is working on for the front. I know
a few of the more modified race spridgets who who be into that...
Mike
----- Original Message -----
From "rob thomas" <rob at thomasr.greatxscape.net>
To: "spridgets" <spridgets@autox.team.net>
Sent: Friday, June 09, 2000 6:52 PM
Subject: Frontline UK
> Someone (Dan Mullis?) was asking about the setting of the front shocks on
> the Frontline kit. I asked Tim Fenna (owner) and he said that the shocks
> are easily capable of being used on much heavier cars and so only a few
> clicks from minimum are all that is needed. One full turn (4 clicks) is
> easily enough for the average car, perhaps even less.
> He showed me the new brakes he is designing. 10 inch-plus vented discs
and
> 4-pot calipers inside the original wheels!!!!!! He had a similar set-up
on
> his K-series engined Midget with all of the available options. Veeeeeeery
> nice! I found a Riley 1.5 in a scrapyard on the way home with the rear
axle
> and brakes still intact and have arranged to be first in line for them
when
> the car gets pulled.
> Not a bad week so far.
>
>
|