I've gonr several times to .0625, which is the standard size for 1098. Had
to do a lot of other things when using those pistons, but there was no
problem with the bore taking that amount. At least the blocks I had it
done to.
Paul A
>Re: 948cc
>Anyone know what the practical limit is for an overbore? Any real world
experiences? Some say .060 is OK. Bob C
----------------------- Internet Header --------------------------------
Received: from triumph.cs.utah.edu (triumph.cs.utah.edu [155.99.188.52])
by spdmgaac.compuserve.com (8.9.3/8.9.3/SUN-1.9) with ESMTP id
AAA00281;
Thu, 11 May 2000 00:57:57 -0400 (EDT)
Received: (from majordom@localhost)
by triumph.cs.utah.edu (8.9.1/8.9.1) id WAA09852
for spridgets-actors; Wed, 10 May 2000 22:50:06 -0600 (MDT)
From BCAH at aol.com
Date: Thu, 11 May 2000 00:49:58 EDT
Subject: 948cc
To: spridgets@autox.team.net
|