----- Original Message -----
From "George Procyshyn" <geopro at cyberdrive.net>
To: <DLancer7676@cs.com>
Sent: Monday, April 24, 2000 11:29 PM
Subject: Re: OK--You CAN turn around the Flywheel Ring!!
>
> David
> Don't victories like that feel SOOOOOOOO good!
> Congrats!
> George Procyshyn
> '58 AN5
>
>
> Subject: OK--You CAN turn around the Flywheel Ring!!
>
>
> > OK OK--I stand totally corrected and humbly educated!!
> Today we pulled the
> > starter, which was jammed with the flywheel and
discovered
> flywheel tooth
> > marks in the front body of the starter. The DCO (me)
had
> not installed the
> > approximately 3/8" spacer that sits between the starter
> and the rear plate on
> > the '79 Midget. Once the starter had been unbolted and
> removed, the spacer
> > installed in place, and the entire unit rebolted into
its
> position, the
> > Midget started right up! The starter engaged
> beautifully!!!!
> >
> > Bottom line: You really CAN turn the flywheel ring
around
> to present the
>
>
|