spridgets
[Top] [All Lists]

Re: Still not starting...

To: <spridgets@autox.team.net>, <adrian@workgroup.net>
Subject: Re: Still not starting...
Date: Fri, 21 Apr 2000 14:32:59 -0700charset="iso-8859-1"
References: <200004212038.NAA03652@shorter.eng.sun.com>
Don't know if this has been mentioned yet or not, but the firing order may
be out of whack.  Also there seems to be a problem lately with Lucas rotors
and/or caps.  This drove me crazy last August.  Hope this info helps!

Greg Gowins
'69 Sprite
Dublin, CA

----- Original Message -----
From Bryan Vandiver <Bryan.Vandiver at Eng.Sun.COM>
To: <spridgets@autox.team.net>; <adrian@workgroup.net>
Sent: Friday, April 21, 2000 1:38 PM
Subject: Re: Still not starting...


> Adrian,
>
> Try the distributor again. I thought I had mine in correct too, but it was
180
> out.
>
>  - Bryan
>
> >To: "Spridgets (E-mail)" <spridgets@autox.team.net>
> >Subject: Still not starting...
> >MIME-Version: 1.0
> >
> >I spent some quality time in the garage...had one mechanic (does it for a
> >living) with me and one on the phone for help.  We took the timing cover
off
> >and readjusted the timing chain, which appeared to be a couple notches
off.
> >Put it all back together, and the d*mn thing still won't start.
So...it's
> >got fuel, fire, and compression.  It is no longer backfiring...no flames
> >shooting out the carb, with gases now going out the tail pipe.  In
theory,
> >the distributor is right where it's supposed to be (not 180 off, but who
> >knows?).  It turns over just fine and likes to sputter enough to
disengage
> >the starter, but won't actually ever start.  Is the timing still totally
> >off?  Is there anything else that could possibly keep the car from
starting?
> >Everything I can think of should just make it run bad, but shouldn't
prevent
> >it from starting.  I've been trying to find some info in the archives on
> >setting timing properly (my crank sprocket has no timing notches/marks on
> >it), but can't find much.  Can an engine be assembled so totally screwy
that
> >it just won't start?  Thanks!
> >
> >adrian,
> >'75 Midget that won't start
> >'75 Midget waiting on some TLC, but I'm too annoyed with the other one
> >
> >--------------------------------
> >J. Adrian Barnes, MCSD
> >Business Information Group, LLC
> >865.777.1382 x23
> >Fax 865.777.1383
> >
> >http://www.midgetweb.com
> >
> >http://www.workgroup.net
> >--------------------------------
> >
>
>


<Prev in Thread] Current Thread [Next in Thread>