Jeesh....thanks a million Mark. I would have swored them wus pipe
threaded! I'll stop accusing Jody of having washed it down the drain with
the last load of laundry. Larry.
-----Original Message-----
From IfixMGs at aol.com <IfixMGs@aol.com>
To: woodrat@spacey.net <woodrat@spacey.net>
Date: Monday, April 10, 2000 2:01 PM
Subject: Latest Smooth Move
>Larry,
> if you are talking about the air pump ports, they are 7/16 fine thread,
>SAE, nothing English about them..... The hot set up is to use a Dorman
allen
>plug; a bit tough to find, but not impossible; next best is an allen-headed
>bolt. When I use allen plugs, I generally fill them over with JB weld and
>paint to match the head. Leaves no trace...
>When I have to use bolts, I torque then cut them flush with the head, then
>countersink slightly with a die grinder and fill with JB. Mark Childers
>Union Jack Spares and Repairs VA Beach VA
>
|