spridgets
[Top] [All Lists]

Re: thanks; Was: Re: oil pressure gauge priming

To: JustBrits@aol.com
Subject: Re: thanks; Was: Re: oil pressure gauge priming
Date: Sun, 2 Apr 2000 12:42:32 -0400
Cc: spridgets@autox.team.net
References: <20.4013c91.2618cf1b@aol.com>
Ed,

Thanks much; makes a lot of sense. Happily, the interior is out now, 
so if I'm a little over-zealous spinning the engine with the olive 
nut loose, at least the spewing oil won't ruin too many things!

Jeff

---
On 4/2/00, JustBrits@aol.com wrote:
>In a message dated 04/01/2000 11:36:14 PM Central Daylight Time,
>jboatri@emory.edu writes:
>
><< ust hook it up and
> make sure the pressure reads correct and steady.
>  >>
>
>Jeff:
>
>   Me suggestion would be whilst spinning with plugs out to build pressure,
>loosen the gauge-end olive nut just enough to release air.  Then when you do
>start it, you will see very close to correct reading.
>
>Cheers........
>
>         Ed

Jeffrey H. Boatright, PhD
Senior Editor, Molecular Vision
http://www.molvis.org/molvis
"Seeing the Future in a Very Tiny Way"

<Prev in Thread] Current Thread [Next in Thread>