Hi, Ric --
If the wiper motor you're using is the same as the one in a RWA Midget, then
I have a plug on an old harness just taking up space in my garage. Send me
your mailing address, and it's yours.
Steve Byers
Havelock, NC USA
'73 Midget GAN5UD126009G "OO NINE"
"It is better to remain silent, and be thought a fool
than to speak, and remove all doubt" -- Mark Twain
----- Original Message -----
From Ric Otte <otte at cats.ucsc.edu>
To: <spridgets@autox.team.net>
Sent: Sunday, January 09, 2000 8:11 PM
Subject: wiper wiring plug needed
> Hi,
>
> I'm slowly putting a later wiper motor in my 62 sprite, and am about ready
> to wire it up. I've got the excellent wiring diagram from Eriks Skinkis,
> but I realized that I have to find some way to connect the wires in the
car
> to the plug in the wiper motor. The wiper motor has a plastic plug with
> some metal prongs sticking out of it. The correct wiring harness would
> have a plastic plug that plugged into this plug, and the wires would all
be
> connected, without any danger of shorting them out. If I just use crimp
on
> wire connectors, the wires can possible short out, because the connectors
> aren't insulated all the way. I've checked at local auto parts stores,
but
> they don't seem to have any plug that would fit (it needs to have 5
wires).
> I was wondering if anyone had a parts car and they'd be willing to sell me
> the plug that connects to the wiper. Or, if anyone has any idea of a good
> way to connect the wires? I know this doesn't make much sense and sounds
> like mumbo jumbo, but I'd sure appeciate any info or help. Thanks,
>
> Ric Otte
>
>
>
>
|