Thank you very much.
:-)
At 07:53 AM 8/19/99 EDT, LBCarNut@aol.com wrote:
>Peggy,
> If you are talkling about a brownish type stuff that looks like it has
>eaten into the plastic, I would try some plastic cleaner and then polish
like
>the motorcycle guys use on their windshields. If the stuff is ingrained in
>the surface of the plastic I have been able to clear it up a bit by wet
>sanding with 1000-1500 grit sandpaper and then buffing it out with the
>plastic cleaner and polish. It will never look like new but you will be able
>to see through it. Lay the top out on a flat surface when sanding/buffing do
>not try to do it on the car.
>Regards,
>Peter S.
>Charlotte NC
>
>
|