The face colouring is inverted if I recall correctly. Check Original
Sprites and Midgets or wait for me to wander over to the barn to
check.
Mike
----- Original Message -----
From: Bryan Vandiver <Bryan.Vandiver@Eng.Sun.COM>
To: <Dave.Vrba@am.sony.com>; <spridgets@autox.team.net>;
<GMari58175@aol.com>
Sent: Saturday, 14 August 1999 7:23
Subject: Re: Correct gauge # '62 MKII Sprite
> I believe that both the bugeye, and MarkII use the same gauges, is that
correct??, If
> so, I may have an extra speedo available soon. (got three coming in the
mail from eBay)
>
> Regards,
> Bryan Vandiver
> San Jose, CA
>
> >Subject: Re: Correct gauge # '62 MKII Sprite
> >To: Dave.Vrba@am.sony.com, spridgets@autox.team.net
> >MIME-Version: 1.0
> >
> >Greetings Dave and list,
> >The correct gauges for the 62 AN6 MKII is as follows:
> >Speedo: BMC # BHA 4210....Smiths # RN 6126/00
> >Tach: BMC# BHA 4213.......Smiths# RN 2313/00
> >
> >The speedo and tach both have black faces with a silver center. Both
have
> >white lettering. The speedo goes to 100mph.
> >The tach goes from 0-60; and has printed << x 100 3-1
> >The speedo should have a translucent blue plastic lens which illuminates
when
> >the high beam is on. It is diamond cut.
> >The speedo has a similar plastic lens except it's red. THis is for
ignition.
> >Hope this helps
> >
> >George Marinos
> >Sprite MKII AN6
> >supercharged
> >glen rock, nj
>
>
|