spridgets
[Top] [All Lists]

Re: seating pad plates

To: kpdii@mindspring.com, spridgets@autox.team.net
Subject: Re: seating pad plates
From: Kroyell@aol.com
Date: Tue, 10 Aug 1999 00:54:04 EDT
Reply-to: Kroyell@aol.com
Sender: owner-spridgets@autox.team.net
In a message dated 8/9/99 10:45:54 AM, kpdii@mindspring.com writes:

<< Hey guys,

I got the right rear spring on with no trouble (yea right), and was working 
on the left side, 
when I noticed I was looking at a part that I hadn't seen on the right side.

It turns out that I am missing both the metal plates that go with the rubber 
seating pad.  
These are the plates have the holes for the u-bolts that line pads up with 
the pegs from 
the axel housing. 

Does anyone have a source for these.  I called Motorhead, Moss, and Minimania 
and none
of them stock this, anyone have a couple?  Used is fine?  

Thanks
Patton >>
----------------------------------------------------
I've got some from my parts car, your welcome to have them.
I just got through putting in new rear leafs and can see that 
it might be a problem if there missing!! 


York Powell

<Prev in Thread] Current Thread [Next in Thread>