Use a clip lead to bypass the ignition circuit. Go straight from the
battery to the coil and check for spark. this will tell you if the engine
parts are ok. If this works start tracing backwards from there. If not, you
probably have a bad coil.
-----Original Message-----
From: Jeff Boatright [mailto:jboatri@emory.edu]
Sent: Wednesday, July 21, 1999 2:07 PM
To: spridgets@autox.team.net
Subject: spridget still down
The Sprite still has no spark. I've replaced the Pertronix Ignitor with the
old points and condensor (which only had a few thousand miles on it). There
still is no spark. I guess I'm not getting any power to the primary. Any
suggestions?
Jeffrey H. Boatright, PhD
Senior Editor, Molecular Vision
http://www.molvis.org/molvis
"Seeing the Future in a Very Tiny Way"
|