Good idea on the holes and cotter key. This should also work to keep the
standard Bugeye emblem on.
The problem is that the glass bonnet is pretty thick at that spot and the
standard clips don't go on far enough. I had planned to do something about
it but never got around to it. Now I will.
Larry Miller
http://www.ado13.com
Seen It All, Done It All, Can't Remember Most Of It.
----- Original Message -----
From: David Ramsey <dwramsey@worldnet.att.net>
To: Larry Miller <millerls@ado13.com>
Cc: <spridgets@autox.team.net>
Sent: Thursday, July 01, 1999 1:36 PM
Subject: Re: S**T(bug-i bonnet emblem)
Larry, Just cut the wings off a later model one, then take an old inner
tube, cut a gasket to fit it, put it on the car with the new gasket under
the bonnet, drill holes in the tabs that will fit a cotter key so it will
hold it on tight with the head of the cotter key, then bend the leg of the
key over the tab. Works for me. At least it didn't disappear along with
you arrow in a parking lot.
Crash
|