spridgets
[Top] [All Lists]

Re: Master cylinder conversion

To: rkaplan@us.net, spridgets@autox.team.net
Subject: Re: Master cylinder conversion
From: Ajhsys@aol.com
Date: Wed, 28 Apr 1999 10:28:57 EDT
Reply-to: Ajhsys@aol.com
Sender: owner-spridgets@autox.team.net
In a message dated 4/27/99 10:35:00 PM Eastern Daylight Time, rkaplan@us.net 
writes:

<< 
 When I went to fit the dual pedal box up, I noticed that the brake line
 outputs coming out of the master cylinder run right into the wiper motor
 housing.  What am I missing here?  >>

- - - - - - - - - - - - - - - - - - - -

In my '77, the brake lines come out the right side of the MC and make a 90 
degree turn toward the front of the car.  Then they go down to the warning 
light valve.  Don't forget to install that.

Check the brake line diagrams for later cars in the Haynes or Bentley manuals.

Allen Hefner
'77 Midget
'92 Mitsubishi Expo LRV Sport

<Prev in Thread] Current Thread [Next in Thread>