On Wed, 10 Mar 1999, Rick Williams wrote:
>
> Ulix Goettsch wrote:
>
> > Yes, very disappointing though. I had ordered the backissue of GRM just
> > for this article, and they didn't even measure the camber change...
> >
>
> >From the article:Camber measured one-half-degree positive with the good stock
> bushings and one degree negative with the offset bushings. Pyrometer checks
> showed that tire temperatures across the front tires varied less with the
>offset
> bushings.
>
> Rick
Ahh...Uhhhmmm....maybe I should reread the article, it's been a while.
My car was at 1-3/4 deg positve and I believe that is what the workshop
manual shows as stock. I am afraid my camber is still positive with the
bushings.
Ulix __/__,__ ___/__|\__
..............................................(_o____o_)....<_O_____O_/...
'67 Sprite '74 X1/9
|