>From my recent recollection, on my 61 the crank is 1 5/16, wheel hub 1
1/16. Maybe '67 is different. I gently used a gear puller. It popped right
off.
----------
> From: Ulix Goettsch
>
> Jason,
> it's the same size as the crankshaft nut, if you really need to know I
can
> look it up.
> Remove the column shroud, then you can hammer against the back of the
> wheel with a hammer and punch to remove it.
> Leave the nut on a couple of turns to keep the wheel in the car when it
> comes loose.
> Ulix
>
>
>
> On Mon, 21 Sep 1998, Jason Urban wrote:
>
> > Hi!!!
> >
> > Well, I finally got around to taking the 'extra' Sprite apart
yesterday.
> > It's a '67 - anybody looking for anything??
> >
> > Anyway, how do you go about removing the steering wheel?? What size
socket
> > and remover is used??
> >
> > Thanks!
> > Jason.
> >
> >
> > | Jason Urban - APOGEE LABS 215-699-2060 |
> > | CA Studio www.dynanet.com/~crackerarts |
> > | '95 Z/28 6spd '65&'67 Austin-Healey Sprites |
> >
>
> Ulix __/__,__
> .......................................................... (_o____o_)....
> '67 Sprite
>
|