In a message dated 98-08-08 00:33:25 EDT, ldsp@flash.net writes:
<< While getting ready for a windshield and redoing the
frame & posts I had the posts stripped, There was a coat of grayish silver
paint on them originally, Is this the correct coating or are they supposed
to be polished then clear anodized which will dull the polish and turn them
gray silver in color? >>
Hi Leo and Listers,
The windshield posts were originally painted silver. Let me know if you need
the PPG color code. Basically they were painted the same color as the wheel
rims. Warnning in that the correct color is a bear to paint as it takes a
good thirty coats to get a solid covering. This because when properly thinned
is almost translucent. The result though is very very nice. Worth the
effort.
george marios
sprite MKII
AN6
glen rock, nj
|