Timing the '72

[Chuck Ciaffone <chuckc@ibm.net>]

It happens every time I tune my '72. I set the timing,
using a timing lite, to about 10 degrees advance with
the vacuum advance disconnected and plugged. It runs OK.
Then I start turning the dizzy for more advance, and it 
runs better. SoI would guess that I probably run normally
with about 15 or so degrees of advance, AND it still
never seems to ping. Can/should I just keep advancing
the timing till it pings? What's probably going
on here?

chuck
-- 
=====================================================

chuck ciaffone chuckc@ibm.net