In a message dated 98-07-23 21:15:12 EDT, hello39@idt.net writes:
<< can anyone out there verify if the wire lug that the wire from the fuel
gauge goes to faces the front of the car or the rear? >>
Welcome to the club Alan.
The fuel sending unit for the MKI and II Sprites is the same and the wire
screw connection is pointed to the front of the car. This is the only way the
float can measure from the middle of the tank.
You also might want to check and make sure the float and the arm move freely
and that the internal contacts arenot corroded. let me know how it turns out!
george
|