Thanks Peter.
I, too, have used the Saran Wrap (actually a cheap knock-off) trick while
the car is stored - I found that my clutch would need to be bled if the car
sat for extended periods and this has postponed the inevitable. However,
the couple of times that I drove it with the Saran still in place it ended
up with a hole in it - perhaps I should try a higher quality plastic wrap?
How about a rubber ballon? I'm sure someone will suggest that a condom
would be appropriate introduction to this diaphram question ;-). (I seem
to recall making a barometer or something many years ago in Scouts that used
a balloon and it acted like a diaphram and had lots of 'give' to it.)
What's the List feel about whether a diaphram of some sort would really
benefit the brake/clutch system? I hesistate to mess with such an important
aspect of safety myself - anyone "been there, done that"???
Thanks for your input,
Geoff
gmuttart@mtdc.ns.ca
----Original Message-----
From: Peter Samaroo <mrbugeye@hotmail.com>
To: gmuttart@mtdc.ns.ca <gmuttart@mtdc.ns.ca>
Date: July 8, 1998 10:43 AM
Subject: Re: Rubber Diaphram (WAS: Re: HELP: strange brake behavior)
>I have not come up with a way to put in a diaphram yet. However when I
>store the car for extended periods I install a piece of saran wrap under
>the cover to prevent any moisture from getting in. I have forgotten to
>remove it a couple times and it did not affect the brakes or clutch
>action so I guess it acted like a diaphram. Also anytime I open up the
>brake system (changing lines hoses cylinders etc.) I put a piece of
>plastic under the cap to prevent the fluid from running out from the
>line by causing a vacuum in the MC. I change my brake fluid annually to
>get any moisture/contamination out as well.
>Regards,
>Peter.
>
|