OK, so it's really summer here in the South, and
that means HOT! And, my heater control valve (on
the back end of the block) won't close down without
leaking. I know, I know, I'm gonna buy a new one.
but in the meantime, how best to kill the flow of hot
water thru the heater core?
1. I could merely remove the hose from the valve, bypass
the heater box, and run it right back into the return
pipe.
2. I could remove the valve entirely and make a small
blanking plate. But then, what do I do about the return
pipe or open heater tube?
Also, anybod know of a source for these valves at a relatively
reasonable cost.
chuck
--
=====================================================
chuck ciaffone chuckc@ibm.net
|