spridgets
[Top] [All Lists]

Re: rough running midget

To: valntine@postoffice.ptd.net
Subject: Re: rough running midget
From: robert weeks <robert@woozy.com>
Date: Sat, 23 May 1998 08:33:59 -0400
Cc: mgs@Autox.Team.Net, spridgets@Autox.Team.Net
In-reply-to: <3566590E.4499@postoffice.ptd.net>
References: <v03007801b18be19f721f@[206.240.43.80]>
Reply-to: robert weeks <robert@woozy.com>
Sender: owner-spridgets@Autox.Team.Net
Thanks Kevin,

This is a Lucas Sport Coil, so no rivits, but I'm going to try swapping the
coil with my spare and see if that fixes the problem.

Thanks,

Robert

--------

At 1:05 AM -0400 5/23/98, Valentine wrote:
>Robert,
>
>I had a similar problem, turned out to be the rivited connection of the
>spade terminals on the coil.
>
>When cold they were relatively tight, but when it warmed up they were
>loose enough to loose conductivity.
>
>I used Frank C's remedy;  Tap the rivets with a punch to draw them
>tight.  It has been fine ever since.
>
>Kevin Valentine




<Prev in Thread] Current Thread [Next in Thread>