spridgets
[Top] [All Lists]

Fw: facia mounting

To: <spridgets@Autox.Team.Net>
Subject: Fw: facia mounting
From: "carolien coulter" <carolien@coastalnet.com>
Date: Sun, 26 Apr 1998 15:56:03 -0700
Reply-to: "carolien coulter" <carolien@coastalnet.com>
Sender: owner-spridgets@Autox.Team.Net
-----Original Message-----
From: carolien coulter <carolien@coastalnet.com>
To: Jeff Church <jchurch@exis.net>
Date: Sunday, April 26, 1998 3:54 PM
Subject: Re: facia mounting


>
>-----Original Message-----
>From: Jeff Church <jchurch@exis.net>
>To: carolien coulter <carolien@coastalnet.com>
>Date: Sunday, April 26, 1998 12:45 PM
>Subject: Re: facia mounting
>
>
>>Carol,
>>My Bug was missing those two stays.  I made them out of aluminium flat
>>stock.  They bolt onto the bottom lip of the facia (you'll find the holes)
>>directly below the choke knob on the left and the starter knob on the
>right.
>>The other end of the stays attach to the small lip of the heater box
plenum
>>(forward of the gearshift).  They make an amazing difference to the
>rigidity
>>of the facia.
>>
>>Regarding your turn signal indicator, I had the same problem.  I got mine
>to
>>work, unfortunately, I don't remember how I did it.
>>
>>Jeff Church
>>Chesapeake, VA
>>AN5L 11627
>>
>>P.S. Where is Oriental??  I'm originally from the Fayetteville area
(Spring
>>Lake, to be exact).
>>
>>-----Original Message-----
>>From: carolien coulter <carolien@coastalnet.com>
>>To: spridgets@autox.team.net <spridgets@autox.team.net>
>>Date: Saturday, April 25, 1998 6:04 PM
>>Subject: facia mounting
>>
>>
>>>hi everyone,
>>>There was a string on this a while back, however I can't remember exactly
>>>what it said. Anyway, I have 2 brackets, that go on the facia
>somewhere,but
>>>I can't figure out where. Because of all the bodywork there are no
>>>screwholes  or anything else helpful like that.Does anybody remember ??
>>>Thanks, Carol Oriental NC
>>>
>>
>>Hi Jeff,
>Thanks for your repoly. Oriental is about 35 miles from New Bern on the
>Neuse river. Across the river from Cherry Point actually. I just got my
>flasher unit to work, but not how it is supposed to according to the book.
>When I hook the light green wire on the same post as the green and brown on
>the flasher unit ( green and brown comes off the turn switch) the light
>works as it s supposed to. Go figure-Carol.
>


<Prev in Thread] Current Thread [Next in Thread>