alan b fisher wrote:
> > What is the kind of tool I need to remove the
> > differential oil drain/refill taps on my 66 Sprite?
> >
> > They are square, almost 0.5", but I am not so sure.
> >
> > It looks like a 0.5" socket extension with the
> > little "ball" removed could do the trick. Wish I
> > knew how to ... remove the ball.
Hey, I got a $35 gift certificate from Moss Motors
for getting this tip printed in Moss Motoring!
Buy a cheap 3/8 inch to 1/2 inch adapter (with a half
in square that fits on a 3/8 drive wrench).
Touch the four sides of the square bit to a grindstone
to take off a VERY little bit of material, just enough to
have a slight taper on the square.
Then put the unit on your 3/8 socket and whip the suckers out.
--
Trevor Boicey
Ottawa, Canada
tboicey@brit.ca
http://www.brit.ca/~tboicey/
|