Patton, Larry, and listers
The Spridget king pins bushings are not tappered, theyare "steped" meaning one
is
larger then the other. Any good machine shop should have both size reams to do
the job.
I have had 3 sets done through recent years and my machinists charges only $20
per side.
This is only $10 per ream. The last time I was in his shop while he was reaming
(me and my bushings :), I saw the operation. Ream the small hole first, then the
large hole to fit the kingpin. Total time about 15 minutes.
Larry G. Miller wrote:
> Patton
>
> The problem with most local machine shops. at least in this area, is the fact
> that kingpins on a spridget are tapered. The top is smaller than the bottom.
> When asking a shop if they can do the job be sure to mention this. No a big
> healey is not the same. Moss sells the reamer for Spridgets for $200 or so.
>
> Larry
>
> ----------
> From: owner-spridgets@autox.team.net on behalf of Patton Dickson
> Sent: Wednesday, October 22, 1997 10:50 AM
> To: Spridget List
> Subject: Kingpin bushings!!!
>
> I just called Special Interest Autos, just to check what their price on
> the major front end kit was. To my great please they are only charging
> $92.50 for their kit. Moss wants > $200 for theirs and Vicky Brit
> wasn't off by far. The closest I found was $148 by Northwest, so it
> really pays to shop around in this case. Thanks Nory for pointing me in
> this direction (to bad $80 wasn't still in effect).
>
> Well here comes my quandary. I now have the spindle bushings for the
> kingpin, but no reamer to do it myself (I do have access to a big Healey
> one, no chance they are the same is there). I know that Apple will
> install them for $80 for the set, but I am wondering if this is
> something I should be able to do locally since I have all the parts. It
> just doesn't seem that this would be a job that should cost $80 for
> labor only.
>
> Well, I still have to order the A-arms and paint the wires before I
> start on this.
>
> Take care.
>
> Patton
> --
> '67 Austin Healey Sprite MKIV
> My Spritepage (featuring a JAVA Spridget newsgroup) is found at...
> http://www.GEOCITIES.COM/TheTropics/Shores/1256/page2.html
|