Good point Doug - I left that outSingle ZS
--John Henard
http://www.linkedin.com/in/johnhenard
678-984-9078
Date: Fri, 19 Apr 2013 15:46:37 -0400
Subject: Re: [Spits] Spit manifolds removal
From: doug@dougbraun.com
To: johnhenard@hotmail.com
CC: spitfires@autox.team.net
Do you have a single Stromberg,or dual SUs?
Doug
On Apr 19, 2013 3:30 PM,
"John Henard" <johnhenard@hotmail.com> wrote:
Wise (and less frustrated) ones,I am trying to remove the intake and exhaust
manifolds on a '71 and not having much luck. All the manuals/books I have
are
vague. I have removed:main nuts along the top of the intake offend studs at
either end of the exhaust manifoldnut (but not stud) securing the intake to
the exhaust manifoldstuds have been snapped at the exhaust down flangeTwo
things that appear to be hanging on:dowels in the top of the intake flanges
-
not sure how to removetwo more main nuts under the intake holding the
exhaust
to the head (can't get to these yet)What am I missing or how do I remove the
two things above if that is all that is left? Suggestions?
Thanks,
--John Henard
_______________________________________________
Spitfires@autox.team.net
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/spitfires/doug@dougbraun.com
_______________________________________________
Spitfires@autox.team.net
Archive: http://www.team.net/archive
|